Packed with features that make pocket hole Hole joinery even more productive. The K3 Kreg Jig gives you more flexibility than ever both in its use and in its ability to be upgraded as your pocket hole needs grow. Our ultimate kit for pocket hole joinery

Kreg's self-tapping screws were designed for its famous pocket-hole joinery, but that's not all they're good for. Kreg's self-tapping auger point eliminates time-consuming pre-drilling, and these screws are made from the highest quality steel, case-hardened and coated with a dri-lube finish. That means less driving torque for you. This coarse-thread screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF, melamine and pine. The washer head offers a great surface area to seat the screw firmly and helps prevent overdriving. They're on the spendy side, but the quality is worth it.--Kris Jensen-Van Heste

Priced roughly $40 less than the previous K3 model, this full-service pocket-hole drilling system is packed with value. It includes all the core equipment and everything you need to drill fast and easy pocket holes: a classic benchtop design, compatibility with all Kreg Jig Master System accessories, even a SkillBuilder DVD and rugged carrying case! For strong, convenient, and professional-looking joinery, this is it.

The K4 system includes the following:
-Main bench-mounting unit with toggle clamp
-Patented removable 3-hole drill guide
-Spacer block attachment for repairs
-3/8" step bit to drill pocket hole and 3/16" pilot hole in one step
-6" long #2 driver bit
-Dust Collection attachment
-Rugged carrying case, SkillBuilder DVD, and detailed instructions

Make consistent cuts and help avoid kickback with a Dual/Tandem FeatherBoard from Milescraft. This kit comes with two feather boards, sturdy full size spacer and hardware needed for dual OR tandem use. Includes two 5/8in. AND two 3/4in. miter bars as well as four 1/4 in. T-track bolts ensuring a fit in most router tables, table saws, or fences.

Designed for use in pocket hole joinery. Washer head provides greater screw seat area, preventing crushed pockets & run through in particle board and softer woods. Self-tapping auger points provide easy installation and minimal splitting. The dri-lube finish reduces friction for easy installation and protects from rust. Fine thread screws recommended for screwing into hardwoods.

The 1 piece design eliminates clogging and provides a much smoother and faster drilling stroke than the drill bits with replaceable center drills. The KJD bit for our manual pocket hole jigs is made of high speed steel that increases the bit's life.

The safest and easiest way to cut crown and cove molding.Fits all 10” and larger miter saws, regular or sliding.Exclusive fence risers adjust to fit crown and cove molding up to 6" wide.Integral setup guide prevents costly miscuts!Completely portable. Does NOT need to be attached to your miter saw.

The Kreg Magnetic Drawer Slide Mounting Tool simplifies the work of positioning your metallic slides to ensure smooth gliding drawer movement in cabinets. It uses the intersection of the cabinet stile and rail in face frame cabinets, and the cabinet side in frameless cabinets, as a reference point for positioning a slide perfectly parallel to the drawer opening. Simply place a metallic drawer slide into position on the base of the tool, which uses magnets to hold the slide in place, align the tool where the stile and rail meet, and drive the screws for a perfect alignment every time.

Accelerate your learning process with this instructional DVD. The Pocket Hole Solution series features TV personality John Sillaots as he leads you through the various steps needed to build your own custom tables providing fast, strong, simple approach to your next woodworking project.