###############################################################################################################################################################################################################################################################

Malco Folding ToolsFolding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes assure proper depth alignment.24F - 24 " (61 cm) Folding Tool with 3/8" (9.5 mm) & 1" (25.4 mm) depths. Extra long folding tool may also be used as a mini-brake by roofing and siding applications.

These rugged lever action tie tools feature a unique notched gripper. A clean black baked on enamel wrinkle finish will also weather the elements and stand up to abuse on-the-job. Comfortable handles reduce the pinch point area; gray vinyl cushion grips. Works on all ties including thin designs. Length 6".

For making clean and accurate angle bends for aluminum roof flashing or fascia corners. Jaws depth graduations in 1/4" increments to a maximum 2" bending depth. Lightweight die cast aluminum jaws with compound handle leverage easy to use on-the-job, evenwhen working from heights. NOT WARRANTED FOR USE AS A STRIKING TOOL OR FOR USE ON FERROUS SHEET METAL.

The Malco DEFT is a high leverage Drip Edge Folding Tool that provides quick bends in standing seam panel edges. Work can be done on installed panels or on a work bench for pre bending panels. The DEFT Drip Edge Folding Tool makes up to 1 1/2" deep bends along drip edge of roofing panel. The DEFT is constructed of durable lightweight steel and aluminum with weather resistant finishes. This folding tool bending depth is 1 1/2" and has a bending length of 24".

-Bends materials up to 14 Gauge Aluminum & 18 Gauge Steel -Makes up to 90 degree bends -Angle 45 degrees -Bends materials up to 48" Wide -Designed for Bench Top Mounting -Make adjustments quickly using a protractor

Malco Fin Straightening ToolUse the FST2 tool for straightening closely spaced 16, 18, 20, or 22 fins per inch. Features one-piece adjustable combs. The resilient nylon comb material will not damage the soft aluminum fins of condenser or evaporator units. Malco fin tools function by either pushing or pulling and efficiently straighten fins in tight quarters or where multiple passes over bent fins are required. Comfortable offset handles provide a sure grip and protect knuckles from scraping.Fin Straightening tool for 16, 18, 20 , or 22 fins per inch

N2 Malco Hand Notchers One-inch. The N2 Notcher punches a big 1 inch deep "V" notch in common 24 to 28 gauge galvanized sheet metal quickly and easily. A narrower handle opening provides additional user comfort while still allowing a full throat opening. Folding and fabricating metal ductwork is easier than with the full 1 inch clearance that the N2 single operation notcher provides.

Cooper Hand Tools, a division of Cooper Industries, Inc., manufactures and markets many well-known brands of hand tools, chain, and electronic soldering products, including Campbell chain, Crescent brand wrenches and pliers, Lufkin measuring tools, Nicholson files and saws, Plumb hammers, H.K. Porter bolt cutters, Weller soldering products, and Wiss snips. Headquartered in Apex, North Carolina, Cooper Hand Tools has manufacturing facilities in six domestic and seven international locations, and has approximately 4,000 employees worldwide.

Use the Duct Stretcher to hold duct in place with one hand while slipping drive cleat in place with other hand. The low profile, straight body is designed to go anywhere, even in the tightest quarters. Additional spacing holes allow wheels to be adjusted to span greater distances. Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up hole.