Paslode IMCT Impulse, 3-1/4", Cordless Framing Nailer, Drives 2" To 3-1/4" Paper Tape Nails, No Hose Or Compressor Required, Comes With Rugged Plastic Carrying Case, 1 Battery & Battery Charger, Shoots Both Paslode Clipped Head & Round Drive Nails, Features A Lightweight & Well Balanced Design, Tool Free Depth Adjustment & Powerful Motor To Tackle A Variety Of Framing Applications, Is Excellent For Framing, Wall Sheathing, Roof Sheathing, Floor Decking & More, Not Recommended For Driving 3" & 3-1/4" Nails Into Pressure Treated Lumber, Requires Fuel Cell & Battery To Operate, 1 Year Warranty.

When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tool's yellow fuel cell. Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode IM250A Factory Reconditioned Finish Nailer is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.9 pounds. It's able to drive 1-1/4" to 2-1/2" fasteners with ease. Tight spots and corners are no problem for the slim, angled design of the Paslode IM250A. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers: Paslode products cannot be shipped outside of the USA. Includes: 900600F IM250A Cordless Angled Finish Nailer, Durable Plastic Carrying Case, 6-Volt Battery, 2-Hour AC Battery Charger, Quick Reference and Cleaning Guide, Owner's Manual

3/4" - 2-1/2", Cordless, 16 Gauge, Straight Finish Nailer, Weight 4.75 LBS With Battery, Height 11-3/4" Nail, Capacity 100, 2 Strips Length 3/4" - 2-1/2" Cycle Rate 2-3 Nails/Second Fuel Cell Life Approximately 1200 Nails Battery Life, Approximately 4000 Nails Fastener, Type 16 Gauge, Straight Belt Hook Reversible No-Mar Tip, Replaceable Features Fast Set Up, No Hoses, No Compressors, Powerful Motor Drives 3/4" - 2-1/2" Finish Nails In Hard Woods Compact Lightweight Design.

5/8" - 2", Cordless, Brad Nailer, Featuring Impulse&tmreg. Technology, No Hoses Or Compressors Needed, Quick Clear Nose, Should Nail Jam Occur, Adjustable Work Contact Element, Provides Control Of Nail Setting Depth, Drives 18 Gauge Finish Nails, Leaves Small Hole, Powerful Motor, Drives 5/8" To 2" Fasteners Into The Hardest Wood, Long Narrow Nose, Precise Placement Of Fasteners In Tight Spots.

Ryobi One+ Nailer / Stapler. Our One+ System lets you buy Ryobi 18v cordless tools, batteries, and chargers individually, in any combination and order you choose. Buy just what you want and pay for just what you need. Brad nail size: 3/4" up to 1-1/4" Staple size: 1/4" up to 9/16" (3/8" crown width) Easy to load magazine accepts up to 100 brad nails or 84 staples Front activation pin on the magazine helps prevent accidental firing Overmold grip for increased user comfort

The Denali 18-Volt Cordless Nailer makes a great addition to the home or shop. Without the need for an air compressor for power you can literally take this nailer anywhere. It will drive staples up to 9/16 inches in length and 18-gauge brads up to 1-1/4 inches length and is as easy to use as a hammer. Its ergonomic design reduces user fatigue and allows it to fit into small tight workspaces. Package includes tool only. Denali 18-Volt Cordless Battery Pack and Smart Charger sold separately.

The Denali Story
Named after the tallest mountain range in North America, Denali tools stand above the rest in providing an exceptional blend of quality craftsmanship, professional-grade features, and customer value. All homeowners, hobbyists, do-it-yourselfers, and price-conscious contractors will appreciate Denali.

Cordless Framing Nailer CF325, Drives 2" To 3-1/4" Paper Tape Nails, Orange Fuel Cell Required, No Hose Or Compressor Required, Comes With Rugged Plastic Carrying Case, 1 Battery & Battery Charger, Shoots Both Clipped Head & Round Drive Nails, Features A Lightweight & Well Balanced Design, Tool Free Depth Adjustment & Powerful Motor To Tackle A Variety Of Framing Applications, The Tool Includes A New Redesigned Nose For Toe Nailing At Any Angle, Is Excellent For Framing, Wall Sheathing, Roof Sheathing, Floor Decking & More, Can Drive 3-1/4" Nails Into LVL & Pressure Treated Lumber, Requires Fuel Cell & Battery To Operate.

The Hitachi clipped head cordless gas-powered framing nailer provides all the power of a traditional nailer with the convenience of a cordless model. It's built to operate on a fuel rod and a cordless battery to give you perfect portability, because it eliminates the need for an air hose and a compressor. The compact size and lightweight body make it ideal for work in tight areas such as attics, basements, crawl spaces, and ceilings. Use it for framing, sub-flooring, fencing, sheeting, decking truss build-up, remodeling, or punch-out work.

The NR90GC is packed with all the features of a corded model, plus extras that make it easy to use and easy on your hands. It operates with no compressor noise and an impressively well-balanced design that weighs less than eight pounds, so it's gentle on your ears and your arms. This model has a patented elastomer-coated grip that's comfortable and secure for true precision, and a double-lock fuel compartment latch that keeps the fuel rod firmly in place, so it never pops open or interrupts your work flow. The NR90GC also features an E-Z view magazine that lets you tell at a glance when you're running low on nails, plus an adjustable depth of drive nose piece that guarantees accurate fastener placement.

This framing nailer fires nails up to 3-1/2 inches long, at a speed of up to two nails per second. The battery will fire over 4,000 nails per charge, and each fuel rod fires 1,200 nails. The NR90GC boasts a simple two-step loading process that saves time, energy, and downtime between projects. It holds up to 47 nails with a 6-nail lock-out to prevent dry firing, and it has a low battery indicator light to warn when the power is waning. Its 7.2-volt battery is compatible with most Hitachi charging systems, and charges in about an hour. When you're finished with your task or you need both hands, simply hang it from the rafters via the included collapsible rafter hook.

What's in the box:
Hitachi cordless gas-powered framing nailer, one 7.2-volt battery with 1-hour charger, carrying case.