If you're looking for a tool to speed up the process of removing damaged or mildewed grout, then Grout Grabber is for you. The Grout Grabber kit includes 1 adapter, 1 carbide grit blade, and 1 Allen wrench. You'll need a reciprocating saw, preferably cordless. Using the Allen wrench, mount the grout grabber adapter and carbide grit blade on a reciprocating saw. To remove existing grout, approach the grout line at a low speed and cut into the joint until you reach the bottom of the joint. It is especially comfortable to hold the saw in an upside-down position. At the bottom of the joint, increase saw speed and pull backwards, never use Grout Grabber at full speed. Be especially careful as you approach a grout intersection. A tile or two may be out of alignment, and it is possible to chip a tile's edge with the tool. Pay attention, but let your tool do the work. The replaceable carbide grit-coated blades are 1/16" thick, which allows you to work with tiles that have a thin grout line. On the other hand, you can add a total of 4 blades to the shaft (two on each side) to cut grout lines up to 1/2" in a single pass. Wider grout lines can be cut with a second pass. It is important to choose a blade thickness less than the joint width to prevent the tool from binding in the grout line and damaging the edges of the tiles. Whether you are a homeowner or a professional, this tool will get about 300 square feet from a single blade depending on how old the grout is and the type of grout used. There is very little grout dust, but it will be very fine, so be sure to use a good shop vac or a vacuum that has a clean bag and filter to prevent blowing the dust back out into the room. If you are looking for a professional looking grout removal job that can be done quickly, then Grout Grabber is for you!

Cutters are fully adjustable for depth of cut and evenness of shaving thickness and are replaceable. Applications: Shaping chair legs & seats, curved templates and other kinds of curved work. Includes: Vinyl storage pouch.

Contains: Two rubber-gripped 4-1/2" mini scrapers; one 11" extended scraper with 3 single edge razor blades that can be conveniently held in the unique storage handle; and one foldable scraper for safe handling, storage, and better angles for scraping in corners.

This well-rounded set is perfect for most concave, convex and flat surfaces. Scrapers are shown at upper center in photo. Other items sold separately.

*An outstanding value in the indispensable razor-blade scraper updated with ultra-comfort grip*Long 12" handle is easier to use, increases reach and leverage*Ultra-comfort soft rubber grip is easy on hands; firm hold even when wet*Fits standard straight-edge razor blades*Mirror-polished stainless steel for easy cleaning, non-corroding The perfect tool for fast & easy paint, varnish, stain and glue removal; secure adjustable blade holder.

mfr: Bahco Tools Scrapers and Blades. Carbide Scraper ergo® 2-1/2". Manufactured by: Bahco, a JH Williams Company.. This item usually ships within 14 days.

The Crown burnisher is made from high speed steel and fitted with a beautiful rosewood handle. The ideal tool for giving a keen edge to your cabinet scrapers.

Lightweight economy scraper. Available in 3 high visibility colors. Blade reverses for safe storage. Order 24 and receive a pre loaded clip strip.

Blades stays sharp up to 50 times longer than conventional steel blades.

"BAHCO NORTH AMERICAN" WOOD/PAINT SCRAPER Ergonomically designed multi-purpose carbide scrapers with new profile carbide blades for precision work 2-component handle for better grip and comfort Use carbide replacement blade #625 Blade: 1" Handle: 6" Type: Round, Pear, Drop Carded