Every home needs a good set of basic tools, and kits are a great way to get them at a considerable savings. Three things make Denali’s 115-piece kit stand out—the price, an exceptional selection of screwdriver bits, and last but not least, the bag. In fact, it’s hard to find a set of tools as extensive as this for anywhere near this price. If purchased separately, these items would cost $150.00<p> This kit includes all of the tools you need for just about any household chore, from hanging pictures to fixing a leaky faucet. They are of good quality and should handle all of your household chores and repairs for many years to come. Going through this kit, I really appreciated little touches rarely seen in basic tool sets, like the soft-grip rubber cover on the tape measure that makes it easy and comfortable to hold, and the dizzying array of bits that come with the ratcheting screwdriver handle.

But what’s really brilliant is that all of these tools come in a heavy-duty nylon bag. Most tool sets come in big, flat blow-molded cases that can be awkward to store and carry. Plus, some tools invariably fall out when you open the case. That’s why most professionals, after buying a tool set, will throw away the case it came in and go out and buy a separate tool bag or chest to store their tools. The Denali kit’s bag fits easily under a sink cabinet (it actually is the size of a breadbox), and has both a shoulder strap and hand-straps that Velcro together, making it easy to carry around. The mouth of the bag has metal stabilizing rods in the zipper, so it opens wide and stays open, meaning you can set it down, and easily get to any of the tools inside while you are working. There are a ton of pockets lining the inside and outside of the bag to carry little things like nails, screws, tape, picture hangers—all of the little things that seem to crowd your kitchen drawers.

Of course, what are most important are the tools themselves. Again, this is a well-appointed set of quality tools that should outfit you for just about any household need. Here is a complete tally.

What’s In The Bag<br/> 16-ounce ripping hammer with heavy duty fiberglass handle
This is a medium-weight hammer that will handle most household jobs, with claws for pulling nails.

Torpedo Level
A good sturdy level is a must for hanging or straightening pictures, checking tabletop alignment, or mounting towel bars and curtain rods. This 9-inch, aluminum model is accurate, lightweight and easy to handle.<p> Tape measure
The 3/4-inch wide by 16-foot long tape measure has a thumb lock, metric and English markings, marks for placing studs every 16-inches, a belt clip, and a soft-grip rubber shell that makes it easy to grip and comfortable to hold.

Heavy-duty zinc utility knife with rubber grip<p> Wrenches

• 16pc hex key set<br/> These are also called Allen wrenches. The kit comes with 8 in metric and 8 in English measurements.
• 6-piece combination wrench set with steel clip Pliers <ul><li>8-inch needle- nose pliers with wire-cutting blades, useful for getting into small spaces and gripping small nails, screws, nuts, etc. (meets or exceeds ANSI standards)
• 8-inch diagonal pliers (meets or exceeds ANSI standards)<li>8-inch groove-joint pliers(meets or exceeds ANSI standards)
• 7-inch nickel-coated locking pliers are essential for getting a good, solid grip, especially when working in small spaces that don’t allow you to grip with your full strength.
• wire cutters Screwdrivers<br/> Wow, you’d never imagine needing a star-drive screwdriver, until you buy that fancy new European dishwasher. Denali’s kit includes a ratcheting handle with a selection of interchangeable bits to provide an exceptional array of screwdrivers in all sizes and head shapes. The ratcheting handle is a nice feature, making it a lot easier to drive screws that are upside down or in tough to see places, where you really don’t want release pressure on the screwdriver handle to keep turning it.
  • 14 flat head: 4, 5, 6, and 7 mm and 3/32-, 1/8-, 5/32-, 3/16- (x3), 7/32-, and 1/4- (x3) inch<li>9 Phillips head: 1x2, 2x5, and 3x2<li>3 square head: S1, S2, and S3<li>10 star head: T6, T7, T8, T10, T15, T20, T25, T27, T30, and T40
  • 10 hex: 3, 4, 5, 6, and 7 mm and 1/8-, 5/32-, 3/16-, 7/32-, and 1/4-inch
  • 4 Pozidriv: PZ0, PZ1, PZ2, and PZ3
    Poszidriv screws are similar to Phillips head screws, but are less prone to slippage at high torque and so provide better performance when working with air and power tools. Note that Pozidriv screwdrivers are likely to slip or tear out the screw head when used in Phillips screws.
  • 14 nut drivers Drill Bits<br/> This is interesting, since the kit doesn’t come with a drill. The manufacturers apparently assume that either you have a cordless drill and will appreciate a couple of good bit sets, or that if you don’t have one, you should get one. They’re right. If you don’t have a good, basic, cordless drill, you’ll appreciate it when you do. Check out Amazon's selection of cordless drills.
    • 13-piece titanium-coated high-speed steel with steel case: 1/4-, 15/64-, 7/32-, 13/64-, 3/16-, 11/64-, 5/32-, 9/64-, 1/8-. 7/64-, 3/32-, 5/64-, and 1/16-inch<li>50-piece chrome vanadium steel 1-inch screwdriver bit set can be used with either a cordless drill or the ratcheting screwdriver included in this kit.<li>5-piece masonry bit set with steel case: 5/32-, 3/16-, 1/4-, 5/16-, and 3/8-inch

This general tool set has the basics you need to complete any task! Includes:           12' tape measure •      8 oz claw hammer •      6" slip joint pliers •      Eight SAE Hex Keys:  1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" •      Bit Driver •      8" scissors •      10 - 1" CRV screwdriver bits:  1/8", 5/32", 3/16", 1/4", PH1, PH2, PH3, PZ1, PZ2, PZ3 •      10 - 1" CRV screwdriver bits:  T10, T15, T20, T25, T27, T30, 1/8" 5/32", 3/16", 1/4" •      18mm plastic utility knife Assembly level/degree of difficulty: No Assembly Required.

This 135 piece household tool kit is perfect for all small projects around the house. With almost everything you need in a compact case, you'll be finding projects to use them with! This set includes: •      100 piece fastener set •      4.8v cordless screwdriver •      18 mm utility knife •      10 - 1" CRV screwdriver bits:  1/8", 5/32", 3/16", 1/4", PH1, PH2, PH3, PZ1, PZ2, PZ3 •      10 - 1" CRV screwdriver bits:  T10, T15, T20, T25, T27, T30, 1/8" 5/32", 3/16", 1/4" •      8" scissors •      8 oz claw hammer •      Four precision screwdrivers: Phillips #0, Phillips #1, Slotted 2.4mm, Slotted 3.0mm •      UL electrical tape •      6" long nose pliers •      9" plastic magnetic level •      12' x 5/8" measuring tape •      6" adjustable wrench •      UL recharger •      2" putty knife   Assembly level/degree of difficulty: No Assembly Required.

Features: Evo: black skeleton handle, liner lock, and ti-coated and serrated blade Evo Jr: new satin aluminum version with fine edge blade

16Pc Professional Quality Wood Carving Chisel Set 11- 8.5" High Carbon Steel Wood Chisels with High Impact Plastic Handles 3- 6 x 1/2" Silicon Carbide Round, 3 Square, Rectangular Stone 6" Combination Sharpening Stone Wooden Stricker Heavy Duty Carrying Pouch Included

The Stanley 65-piece homeowner's tool set is packaged in a blow molded case for easy tool storage. All tools in the kit meet or exceed ANSI specs. The hex key sets come in durable caddies to keep keys organized, one for SAE keys and a separate one for metric. It includes full polish ratchet and sockets for easy cleaning and comes with a limited lifetime warranty.

Professional's Tool Set contains all the tools needed for most industrial applications, including 1/4", 3/8", and 1/2" quick-release ratcheting drives, with a wide selection of standard and deep sockets in the most common SAE and metric sizes. Chrome vanadium ratcheting Chrome vanadium ratcheting wrenches feature lock-on sockets that won't slip off and a large, quick release button for fast changes. Magnetic screwdrivers have comfortable rubber handles and a wide range of bits. Incredible Value! Includes: 1/2 in. Drive: 72 tooth quick release drive 5 in. Extension Sockets: 1/2 in., 9/16 in., 3/4 in., 7/8 in., 15mm, 17mm, 18mm, 19mm, 21mm 3/8 in. Drive: 72 tooth quick release drive 3 in. Extension 6 in. Extension 3/8 in. to 1/4 in. Adapter Spark Plug Sockets: 5/8 in., 3/16 in. Sockets: 5/16 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 9-15mm, 17mm, 19mm Deep Sockets: 7/16 in., 1/2 in., 9/16 in., 11/16 in., 3/4 in., 12mm, 13mm, 14mm, 16mm, 17mm 1/4 in. Drive: 72 tooth quick release drive 3 in. Extension Sockets: 3/16 in., 7/32 in., 1/4 in., 9/32 in., 5/16 in., 11/32 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 4-13mm Combination Wrenches: 5/16 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 8mm, 10mm, 12mm, 13mm, 14mm, 15mm Pliers: 8 in. long nose cutting, 6 in. diagonal cutting Magnetic screwdrivers: 1/4 in. x 4 in. slotted, 3/16 in. x 3 in. slotted, # 35 2 x 4 in. Phillips, # 35 1 x 3 in. Phillips Magnetic bit drive (44) 1 in. driver bits and hold

This general tool set has the basics you need to complete any task! Includes:           12' tape measure •      8 oz claw hammer •      6" slip joint pliers •      Eight SAE Hex Keys:  1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" •      Bit Driver •      8" scissors •      10 - 1" CRV screwdriver bits:  1/8", 5/32", 3/16", 1/4", PH1, PH2, PH3, PZ1, PZ2, PZ3 •      10 - 1" CRV screwdriver bits:  T10, T15, T20, T25, T27, T30, 1/8" 5/32", 3/16", 1/4" •      18mm plastic utility knife Assembly level/degree of difficulty: No Assembly Required.

Includes: Screwdriver, Screws, Nose Pads, Gromets and Tweezers.

16 Watch Repair Tools This is a new set of 16 watch repair tools. You receive: * One watchband link pin remover * One watchband holder * One spring bar remover * 3 Pin punches * One metal and plastic hammer * One case knife * 3 slotted screwdrivers * 2 Phillips screwdrivers * One case wrench * One pair of long nose pliers with side cutters * One pair of stainless steel tweezers